Right Angle – ServoFit Precison Planetary
“PKX” Series
The “PKX” Series units are a combination of the “P” Series Precision Planetary Gearhead and a low ratio right angle which uses the FlexiAdapt® motor coupling. HeliCamber® gear technology provides minimum wear, low backlash, and low noise. They provide all the great features of the “P” Series unit plus the compact design of a right angle. Some of the features are:
- High torsional stiffness
- 93 to 95% Efficiency
- Assembled in the U.S.A.
- Quiet Running- Noise level as low as 69 dB(A)
- Lowest standard backlash
- Highest running smoothness achieved by proven helical gearing and gear tooth micro-geometry. Gear quality provided by case-hardened and finish-ground sun and planet gears
- Highly efficient spiral bevel gearsets provide quiet operation and excellent torque carrying capacity
- Ring gear machined integral to the housing — not welded or pressed in — provides greater concentricity and eliminates speed fluctuation
- Each planet gear is straddle mounted by two bearings for low noise and minimum backlash. They are pressed onto shafts without keys to minimize misalignment
- Single piece ductile iron housing (GGG70-101,000 psi tensile strength) for maximum heat dissipation, noise dampening, and allows greater lubrication retention on the ring gear
- Magnetic oil filtration
- FKM seals
- Planet carrier straddle mounted for robust output capacity
- FlexiAdapt® motor shaft adapter system allows installation of motor in minutes — no special tools required
- Adapter bushings to fit all motor shafts – no key required
- Bearing options for application specific radial load, axial load, and tilting moments
- Lubricated for life with synthetic oil and sealed to IP65 standards to prevent lubricant contamination for long life. Mounting position must be specified
Beverage, Food, and Washdown Duty
Sizes P2_KX thru P5_KX.
- Synethic oil is standard, food grade available on request
- Coating Options:
- Beverage (3 layers)
- 1 - Primer
- 2 - Industrial 316 stainless steel epoxy
- Food (4 layers – USDA approved for use in processing and handling)
- 1 - Primer
- 2 - Industrial 316 stainless steel epoxy
- 1 - Silver Bullet Anti-Microbial™ epoxy
- Options:
- 1 layer of Ultra Clear Industrial epoxy
- White epoxy (USDA approved)
