In Line – ServoFit Modular System

“C” Series

  

 

C SeriesThese versatile gear drives offer you performance, durability, and economy for a wide range of applications. High efficiency helical gearing keeps motor size to a minimum while running almost silently.

  • One-piece cast iron housing with precision machined bearing support assures gearset alignment, prolongs bearing life, provides exceptional overhung load capacities, and eliminates leakage problems common to two-piece housings
  • High quality helical gearing is case hardened to 58-62 Rockwell C. Precision finished for low noise and long service life.
  • Standard backlash is <20 arc minute
  • Double lip seals keep oil in and contaminants out. Double seals available for severe duty applications
  • Shipped with the proper amount and type of oil to prevent gear damaging dry start-ups
  • High tensile strength shafts with captured keys.  Also available metric or stainless steel
  • Available in four housing styles: N - mounting feet, F - output flange, Q - square output flange and G - tapped holes

Beverage, Food, and Washdown Duty

C Series Washdown

  • Double sealed output — with a dual lip outer seal and a single lip inner seal
  • Stainless steel output shaft (not available in all sizes)
  • ALL stainless steel hardware
  • Coating options:
    • Beverage (3 layers)
      • 1 - Primer
      • 2 - Industrial 316 stainless steel epoxy

    • Food (4 layers – USDA approved for use in processing and handling)

      • 1 - Primer
      • 2 - Industrial 316 stainless steel epoxy
      • 1 - Silver Bullet Anti-Microbial™ epoxy

    • Other options:

      • 1 layer of Ultra Clear Industrial epoxy
      • White epoxy (USDA aprroved)

Silver Bulllet AM™ is a registered trademark of Burke Industrial Coatings.

Standard Delivery 3 days

Input RPM up to 4,500

Nominal output torque – 97 to 62,000 in.lbs. (21-7,000 Nm)

Reducer ratios from 2:1 to 276:1

Ambient temperature - 0°C to + 40°C (104°F)

Noise level - as low as 53 dB(A)

Up to 95.5% Efficiency

Maintenance free

Readily attaches to any servo motor. A wide selection of IEC and NEMA motor plates are stock. (Maximum 10 working days for custom motor plates.)

Motor plate pilot toleranced to fit your motor for precise concentricity

5 year limited warranty (2 years on bearings, seals, etc.)

ATEX Standards

ServoStop