The standard "K" Series Helical/Bevel MGS Food Duty unit is supplied with a patented double sided wobble free bushing sysrem. This unique design allows the unit to be mounted on the shaft from either side of the reducer.
Featuring a distinct support side and a clamp side, the dual tapered cones will overcome a wide range of tolerances normally found with standared shaft materials. Thhe clamp side is determined by the customer but is ususally the outside bushing.
Each case size can be provided with a variety of bushing bore sizes. The unit is selected based on horsepower or torque rating, output speed or ratio and the shaft size of the driven equipment. The bushing is not installed into the unit at the factory, but with easy to follow assemble instructions, the unit and bushing can be mounted on the machinery quickly - without any special tools. The bore size in the unit can be changed any time during the life of the unit simply by changing the bushing kit.
- NEMA C-face Input: O-ring between the motor and reducer. Easy mount maintenance free coupling.
- Outside Closed Cover Cap - protects seals from high pressure washing. Inside Split Cover Cap - enables easy assembly onto the shaft.
- Patented Stainless Steel Double Sided Bushing Mounted into Stainless Steel Output Quill - easily mounts onto standard cold finished, ground, or stainless shafting.
- Double Sealed Output - with a dual lip outer seal and a single lip inner seal
- Stainless steel nameplate and hardware
- Standard Coating -Multilayer Industrial 316 Stainless Steel Epoxy. Food Duty units have two additional layers to achieve the required resistance levels for your extreme washdown conditions. The finish is USDA approved for use in food processing and handling. In additon, all units can be provided, on request, with a clear coat or white epoxy topcoat which is also USDA approved.
- One Standard Unit for ALL Horizontal Mounting Positions Without Chaning the Oil Level. Food grade oil can be provided upon request.
